Thingiverse
Spiral soap holder - customizable
door WT1704
11
Downloads
7
Likes
0
Makes
I needed a soap holder and wanted to practice some SCAD programming ;)
It should be:
- easy to print,
- should not need support to be printed
- should drain the soap (low soap contact area) and drain areas at the bottom.
- should be customizable
therefore I made this open SCAD file.
For those who like to have a bottom you can spedify a bottomHeight > 0 - there will be a bottom and the drain and connections will not be generated.
The sample has been made without bottom.
- bottomThickness = 5
- topTickness=2
- bottomWidth = 0
Please be patient, because of the structure and the objects to be generated for the spiral the calculation for of the STL file might take a while.
It should be:
- easy to print,
- should not need support to be printed
- should drain the soap (low soap contact area) and drain areas at the bottom.
- should be customizable
therefore I made this open SCAD file.
For those who like to have a bottom you can spedify a bottomHeight > 0 - there will be a bottom and the drain and connections will not be generated.
The sample has been made without bottom.
- bottomThickness = 5
- topTickness=2
- bottomWidth = 0
Please be patient, because of the structure and the objects to be generated for the spiral the calculation for of the STL file might take a while.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
