Slicer Discord
Spirale for a marble run – 3D-Druckmodell von MakerWorld MakerWorld
Outdoor Toys

Spirale for a marble run

259 Downloads
94 Likes
92 Makes
Zum Modell
Spiral Track, Here are some spiral tracks for a marble run.There are 3 different models with different count of starts and the spirals have one turn of 360 degrees.In the Video you can see a double spiral with 2 marbles going through parallel. double spiral triple spiralFor each spiral exists one support part.Load the track-model and the support-model into your slicer.Locate both models manually to the centre of your print bed. (both have the same coordinates)The support-model is designed with no gap, so in the slicer it have to be moved in Z direction about -0.2 to -0.4mm. (down)Now there is a gap between the support-model and the track-model of 0.2 to 0.4mm.The support part is printed as "normal model"The model is customized, so other heights could be realized. (see list)If there is some need, write a comment and I will upload the STL files.Update 20.12.2019:In my slicer program not every track model was concentrical with the support model.So I made a circle around both model
Kategorie
Outdoor Toys
Quelle
MakerWorld
Veröffentlicht
Aktualisiert
Was du zum Drucken brauchst: Anfänger Niedrige Konfidenz
Warum?
keine Supports
Ohne Supports Einteilig
Supports 0/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 0/3
Drucker
FDM / FFF
Dateiformat
STL
Material
Marble PLA
Software
Cura, PrusaSlicer o. Ä.
Gleicher Designer, mehr Plattformen

MK_Design veröffentlicht auch auf

110 zusätzliche Modelle auf 2 weiteren Plattformen

Verifiziert durch übereinstimmende Modelltitel über Plattformen hinweg.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

6 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen