Thingiverse
Spitfire Propeller 1:4 scaled model
door viper1990
83
Downloads
86
Likes
2
Makes
Spitfire Propeller designed with Autocad 3D 1:4 model
Root hub to fit into spinner: 3.4cm diameter circle. From Root to tip = 375 mm or 14.76 inches
Comes in 5 parts, glued together using locttite 406 superglue for plastics
Estimated 1.75mm filament needed for 1 blade (1:4 scale model) = Between 15meters to 25meters (49ft to 82ft)
Print with PLA to avoid wrapping and to produce relatively sharp trailing edge of the blade.
Root hub to fit into spinner: 3.4cm diameter circle. From Root to tip = 375 mm or 14.76 inches
Comes in 5 parts, glued together using locttite 406 superglue for plastics
Estimated 1.75mm filament needed for 1 blade (1:4 scale model) = Between 15meters to 25meters (49ft to 82ft)
Print with PLA to avoid wrapping and to produce relatively sharp trailing edge of the blade.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
