Splash and Windscreen

I found out when i put the boat in shallow water (without getting wet feet) i kind of have to push/throw the boat in to keep the rudders out of the sand, the nose sometimes get below surface.
Or when going fast through rough water the splashes getting on the nose of the boat.
This causes the water to go leaking in the front of the deck in to the boat.

With this splash or wind screen the water will mostly be deflect behind the front of the deck to prevent water going in the boat.

The sides are not closed to let the water out if there is water below the screen.

I used the hull_bow_129.stl in the original boat and to fit the screen in (and watertight top of the main hull) i used 1mm for this screen and added an 128mm bow so the aerodynamics in the original design stays the same.

It's very fun to sail this boat and it has a very good handling thanks to wersy's original design.
Just like a go kart on the water.
I only added a screen to try keep things (a bit more) dry.