Thingiverse
Splendor Travel Box
par mattrowley
13
Téléchargements
11
Likes
0
Makes
Link to Completed Box in action:
https://www.youtube.com/watch?v=bprDBPMSljs&t=9s&ab_channel=MatthewRowley
I printed the button and button cover with supports. To get the same duel colour on the lid I layed the text flat on the build plate and set a colour change at 0.4mm. The springs I used are 9.6mm OD, 16mm Length, 0.55mm wire thickness. Spring plates are glued into the windows in the body once the buttons and springs are both in place. I used Araldite epoxy resin for this.
Good Luck.
https://www.youtube.com/watch?v=bprDBPMSljs&t=9s&ab_channel=MatthewRowley
I printed the button and button cover with supports. To get the same duel colour on the lid I layed the text flat on the build plate and set a colour change at 0.4mm. The springs I used are 9.6mm OD, 16mm Length, 0.55mm wire thickness. Spring plates are glued into the windows in the body once the buttons and springs are both in place. I used Araldite epoxy resin for this.
Good Luck.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
