Thingiverse
Split Straddle Square
door sirvsz28
1
Downloads
3
Likes
0
Makes
I split the top piece and added plugs to line everything up for this to fit on a smaller printer.
Printed on a Monoprice Select Mini v2
All credit goes to: https://www.thingiverse.com/thing:1890059
This is a straddle square that is meant to mark up to 3 sides of a piece of lumber at a time. One side of the jig has 45° angles for miters.
It has a jaw depth of 3" and a jaw opening of 4".
The knob and moving piece's threads are 3/8-16 in case your printer has any issues with them so you can use standard hardware.
Only the moving side piece will need support; orient it with the cylindrical bosses against the hotplate.
Printed on a Monoprice Select Mini v2
All credit goes to: https://www.thingiverse.com/thing:1890059
This is a straddle square that is meant to mark up to 3 sides of a piece of lumber at a time. One side of the jig has 45° angles for miters.
It has a jaw depth of 3" and a jaw opening of 4".
The knob and moving piece's threads are 3/8-16 in case your printer has any issues with them so you can use standard hardware.
Only the moving side piece will need support; orient it with the cylindrical bosses against the hotplate.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!