MakerWorld
2D Art
Voir le modèle
Spock portrait - hueforge
9
Téléchargements
9
Likes
6
Makes
One for the sci fi trekky fans! Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeIF YOU WISH TO SCALE PLEASE DO NOT CHANGE Z HEIGHTYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.32mm and the Actual Thickness is 2.24mm #000000 PLA Sunlu + 2.0 Black Transmission Distance: 0.1 #5b6579 PLA BambuLab Basic Blue Gray Transmission Distance: 2.2 #8e9089 PLA BambuLab Basic Gray Transmission Distance: 0.2 #ffffff PLA Sunlu + 2.0 White Transmission Distance: 6.8This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #8 (0.72mm) swap to Blue Gray At layer #13 (1.12mm) swap to Gray At layer #20 (1.68mm) swap to White for the rest.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
