Thingiverse
Spongebob Card Holder
door tgraves226
2
Downloads
8
Likes
0
Makes
*** Updated ***
Update 5/10 2: Re uploaded after using a different house for Squidward's house created by omeryavuz, recreated Patric's house, and recreated all walkways.
Once sliced it looks like it should print without issue. I'll be trying tomorrow but let me know if you do and if you have any issues/feedback.
Update 5/10: Photo attached. I tried to print this and there are some issues with the vectors on two of the houses and the little cutouts for the numbers are on the wrong side (I should not do these late at night :p). I'm fixing that up now but may need to switch the houses around a bit, hang tight.
This for my son's Spongebob Squarepants cards that he got from arcade coin pusher machines.
Tolerance on the cards is tight to hold them in place.
Update 5/10 2: Re uploaded after using a different house for Squidward's house created by omeryavuz, recreated Patric's house, and recreated all walkways.
Once sliced it looks like it should print without issue. I'll be trying tomorrow but let me know if you do and if you have any issues/feedback.
Update 5/10: Photo attached. I tried to print this and there are some issues with the vectors on two of the houses and the little cutouts for the numbers are on the wrong side (I should not do these late at night :p). I'm fixing that up now but may need to switch the houses around a bit, hang tight.
This for my son's Spongebob Squarepants cards that he got from arcade coin pusher machines.
Tolerance on the cards is tight to hold them in place.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
