Slicer Discord
Spooky Cat – 3D printable model from MakerWorld MakerWorld
Decor

Spooky Cat

by Sevro · Decor
220 Downloads
289 Likes
99 Makes
Go to Model
OverviewWicked cat with glowing eyes. I have to admit that it is a little scary in full dark :) InstructionFor eyes use little battery candle light.A cat looks best when it sits high and looks at us from above or from our eye level.You can use it with additional eyes cover or without them.I added also back cover mounted on magnets 5x2mm but it is not necessary. SettingsFor mask I used 20 top walls to prevent light leak. You can use more if you need.For eyes cover you will need AMS because I colored retina from bottom on first layer.I used 0,2 mm layer. If you want more smooth surface use adaptive layers. Have Fun :)
Category
Decor
Source
MakerWorld
Published
Updated
What you need to print this: Intermediate Medium confidence
Why?
2 colors · large print · significant post-processing
Single piece 2 colors / AMS Hardware needed
Supports 1/3
Assembly 0/3
Settings 1/3
Bed size 2/3
Post-process 2/3
Printer
FDM / FFF
File format
STL
Material
Min. bed size
200 mm (Large)
Colors
2 (AMS/MMU recommended)
Post-processing
Sanding, Hardware
Software
Cura, PrusaSlicer, or similar
Same designer, more platforms

Sevro also publishes on

142 additional models across 3 more platforms

Verified by matching model titles across platforms.
No ratings yet
No comments yet – be the first!

Similar Models

6 Suggestions
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Add to Collection