Thingiverse
Spool Drawers
von Noumcreation
230
Downloads
150
Likes
1
Makes
Another spool case / Drawer !
Theses drawers fit a 200mm (Outer diameter) spool with an inner diameter of 106mm an 46.5mm wide (750g ICE filament).
There are four different sizes (180°,90°, 60° & 45°) with two different heights. You can either have one or two drawers for each section and you can mix section sizes.
The drawers turn around a pillar that you can glue or screw in place (I've used 3x10 Philips screws).
Fusion 360 file attached, feel free to use it !
Theses drawers fit a 200mm (Outer diameter) spool with an inner diameter of 106mm an 46.5mm wide (750g ICE filament).
There are four different sizes (180°,90°, 60° & 45°) with two different heights. You can either have one or two drawers for each section and you can mix section sizes.
The drawers turn around a pillar that you can glue or screw in place (I've used 3x10 Philips screws).
Fusion 360 file attached, feel free to use it !
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
