Spool Holder Flashforge 600g spool
door MikeHall
1
Downloads
0
Likes
0
Makes
I bought a roll of filament from a store and realised it wouldnt fit on my existing holder, so i decided to create this one.
Feel free to download and use.
Made to fit spools (upto 20mm core. Upto 200mm overall diameter, upto 70mm wide)
Print settings:
.2 layer height
200'c hot end
50'c bed
20% infil
I made with 6mm brim around to help support the main rod
Takes about 12.5hrs to print and used (180g or 60.3m of filament)
Has been designed so there is no need to add supports
Feel free to share and upload photos =)
Feel free to download and use.
Made to fit spools (upto 20mm core. Upto 200mm overall diameter, upto 70mm wide)
Print settings:
.2 layer height
200'c hot end
50'c bed
20% infil
I made with 6mm brim around to help support the main rod
Takes about 12.5hrs to print and used (180g or 60.3m of filament)
Has been designed so there is no need to add supports
Feel free to share and upload photos =)
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!