Spool holder system

System that holds 2 standard 1 kg spools with the ability to put a big boy on the top rollers.

Needs to be screwed to a base plate(are you make 2 connecting brakets), has 1 printed brace on top.

The bearings need a printed spacer to center it but it's in the file.

There is a left and a right side to fit the brace

Ideal to put in a climate controlled system so you don't have to open it all the time to change spools or if you have to change a lot

You can choose the material just make sure it's picked for the right temperature range for you're situation.

In addition you need 8 M5x16/20 screws for the bearing and of course 8 rollerskating bearings.

minimum of 10 heated inserts M5 for every complete spool holder.

Here are the bearings and inserts i used.

M5 inserts: https://tinyurl.com/4xx87auz

Bearings: https://tinyurl.com/bdfucvr2

Video about the system:
https://youtu.be/URuWhZz_9sc