Thingiverse
Spool holder
von baspongo
10
Downloads
10
Likes
0
Makes
Spool holder for 2020 profile and acrylic sheet
requires two 10cm long screws and four 608zz bearings.
The acrylic plate should be at least 3mm thick.
requires two 10cm long screws and four 608zz bearings.
The acrylic plate should be at least 3mm thick.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!