Spool Holder

edit# I've uploaded the original version which does not include the name or filament guide. The back of the base plate is 2mm thinner but tested and will still support a 1kg filament roll.

I designed this spool holder and filament guide in Fusion 360.

I seperated the filament guide from the spool holder for those that would rather not intergrate the guide. Both .stl's have been uploaded. Both pieces were printed in PLA. You may find better strength printing with a stronger filament.

I used Simplify3d as my slicer. You will need to adjust the model in your slicer to print upright like that in the photo. Remember to reset to centre. The filament guide will need to be rotated to 210 degrees on the x axis. The Holder will need to be rotated to -90 degrees on the y axis.

For best printing results print with supports turned on. The filament guide is best to be printed at 100% infill and will take approximately 40mins to print (it did on my Tornado).

I printed the holder with 2