Thingiverse

Spool Holder

by romanmitr

72 Downloads

251 Likes

0 Makes

Simply a spool holder for 1kg and 2kg filament spools. It can be mounted normally or upside down as shown in the photo. The perforated clamping wedges are provided to tighten the holder. A standard silicone cartridge is glued into the printed 'screws' and serves as an axis on which the spool rotates.
I printed grey in PLA and white in PETG, both with a 0.6 mm nozzle. The white spacers can be used as spacers for 1kg spools, but are not absolutely necessary.
Have fun, kind regards from Austria.

Source

Thingiverse

What you need to print this: Intermediate Low confidence

Single piece Hardware needed

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 1/3

Printer

FDM / FFF

File format