Slicer Discord
Spool ring for Bambu Lab AMS - w/ stacking! – 3D-printbaar model van MakerWorld MakerWorld
3D Printer Accessories

Spool ring for Bambu Lab AMS - w/ stacking!

104 Downloads
28 Likes
76 Makes
Model downloaden
I got really tired of printing one AMS ring at a time. After a bit of testing I figured out that you can print super slim rings with stacked printing. !!! USE MY PROFILE !!! ABS/ASA (PLA has not been tested should be fine - see notes below).2mm layer heightironing on all top surfacesturn on brim inside and outsideI have successfully printed 20 at one time with no issues. I included a file that you can print 40 at one time if you are feeling like flying close to the sun. Theses have been tested on a bunch of different rolls of filament but it should work on anything with a 200mm cardboard spool:AnycubicAmbrosiaElegooeSunInlandOverturePolymaker (PolyMax, PolyTerra, PolyLite)Sovol Note: I printed these in ABS and ASA to make sure layer adhesion is good. They are a tight fit to make sure the spools do not come out of the ring. You will have to apply some force to get them on and off, that is why I have chosen to use ABS. Boost MeHave fun, and if you like it please boost!
Categorie
3D Printer Accessories
Bron
MakerWorld
Gepubliceerd
Bijgewerkt
Wat je nodig hebt om te printen: Beginner Gemiddelde betrouwbaarheid
Waarom?
2 kleuren · 0.20mm lagen
Eendelig 2 kleuren / AMS
Supports 1/3
Montage 0/3
Instellingen 1/3
Bedgrootte 0/3
Nabewerking 0/3
Printer
FDM / FFF
Bestandsformaat
STL
Materiaal
PLA, ABS, ASA
Min. bedgrootte
50 mm (Klein)
Kleuren
2 (AMS/MMU aanbevolen)
Laaghoogte
0.2 mm
Software
Cura, PrusaSlicer of vergelijkbaar
Nog geen beoordelingen
Nog geen reacties – wees de eerste!

Vergelijkbare modellen

6 Suggesties
Feed Blog Slicer Kostenrekenmachine Zoeken op afbeelding Indienen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Toevoegen aan collectie