Spooladapter for A1 Mini

This Version is Outdated. PLS use V3. There are already a lot of Adapters for the A1 Mini Spoolholder, but i don't like the approach of those. So i designed my own. the two parts with the flange should be put on the inside of the spoolholder. just place the parts around the axis and press them together. the fitting hat 0.15mm clearance and should press quite tight together. the flange prevents the spool from going too far in. (i had 0.1mm before, but that was very tight - also shortenend the clips so its easier to assemble) the other two without the flange should be placed in the front of the spoolholder, otherwise you cannot put the spool on top. also, the front flange of the spoolholder has a slightly different diameter, so it needed to be adjustet a little bit.the two parts connect in the same way. just but them on the axis, press them together and press them on the flange. i alsways use the jayo filament, so the adapter is optimized for the spooldiameter. the adapter therefore