SpotMicro

SummaryMade by https://www.thingiverse.com/KDY0523/designsIt works on the basis of the Arduino mega, and if you use a different board, you have to redesign the 'plate' file yourself and print the 'non-mega' file instead of the regular file.The ultra sonic sensor can be used for mapping or obstacle avoidance.When you attach the servo horn to the 3D printed parts, you must use the HOTGLUE.THERE IS NO CODE YET, SO YOU HAVE TO WRITE IT YOURSELF.Assembly video part 1 : https://youtu.be/03RR-mz2hwAAssembly video part 2 : https://youtu.be/LV5vvmhwtxMInstagram : https://www.instagram.com/kim.d.yeon/To make this, you need the following...Electronics12 × MG 996 R servo motor1 × Arduino Mega2 × HC-SR04 Ultrasonic sensor1 × HC-06 Bluetooth module1 × MPU-6050 Gyro sensor1 × I2C 16x2 LCD Module1 × Rleil rocker switch RL3-47.4v BatteryScrews, Nuts and Bearings8 × 'M5×15'40 × 'M4×20'8 × 'M4×15'48 × 'M4 nut'4 × 'M3×20'28 × 'M3×10'16 × &#39