Thingiverse
Spray Bottle Hanger
41
Download
76
Likes
0
Makes
This is a Spray bottle hanger I designed around a basic idea with a strict guideline.
No brim, rafts or supports required.
These are capable of holding 1KG and can withstand roughly 1G of force applied to them In this revision if you have good layer adhesion. Printed upright I found minimal to no stringing even on an untuned machine. This is a 1-2 hour print depending on the machine. Light on material and strong I print this at 3 wall, 3 top/bottom and 10-20% infill. Tested in Esun PLA+ and in Esun PETG. Please share with attribution and give feedback as this was my first design taken to testing and commercial phase. Some early concepts are in photos and had many issues, early revisions can be provided if wanted for some reason. Best mounting practice is 2 x 8G 16mm Button heads, Remove mouse ears after print.
** Update
V1_6
Re sketched and reformatted some of the features for increased slicer reliability and modified how the different facets of the design interact. This has
No brim, rafts or supports required.
These are capable of holding 1KG and can withstand roughly 1G of force applied to them In this revision if you have good layer adhesion. Printed upright I found minimal to no stringing even on an untuned machine. This is a 1-2 hour print depending on the machine. Light on material and strong I print this at 3 wall, 3 top/bottom and 10-20% infill. Tested in Esun PLA+ and in Esun PETG. Please share with attribution and give feedback as this was my first design taken to testing and commercial phase. Some early concepts are in photos and had many issues, early revisions can be provided if wanted for some reason. Best mounting practice is 2 x 8G 16mm Button heads, Remove mouse ears after print.
** Update
V1_6
Re sketched and reformatted some of the features for increased slicer reliability and modified how the different facets of the design interact. This has
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
