SPRAY BOTTLE RACK - WALL MOUNTED

I designed this part because I didn't want to print multiple stand to put my spray bottle and use a dozens of screw for 5 or plus bottles. Furthermore, every stand has their own dimension, and I could end in a situation where there's a little space left on the wall, where I cannot put anything. With this you only need a wood dowel of Ø12 mm, or ½" for my US friends, print one left and one right support and cut the dowel at the desired lenght. Under the support you'll find a hole for a Ø3 mm wood screw, just to secure the dowel when screwing the entire support, and a little slot, that is the bottom of the Ø12 mm hole, where the dowel will go against. You can measure it with a caliper but I'll tell you, it's 7.5 mm. So it means that you'll only have to make your wall measure and deduct 15 mm in order to obtain the correct dowel lenght. Then you can screw it to the wall with four screw. I used Ø4 mm wood screws. Post your photos, I want to see your color combin