Thingiverse
Spring based Damper for 2020 T-nut Frames
por marcingenious
10
Descargas
10
Likes
0
Makes
This is an anti-vibration spring damper for a 2020 T-nut Frame. I constructed it for my Ender 3 to reduce noise during printing. It works pretty fine.
I needed to replace the extruder spring of my Ender 3 due to under extrusion. I only could order 10 spare pieces per package for a couple of Euros at a chinese reseller. With the residual spare springs I constructed these dampers for my Ender 3. All you need are two springs per damper.
Mounting:
The old rubber feed of your Ender 3 (dimensions of mine: 40 mm x 20 mm) can be attached to the bottom part of the spring damper. The top part can be connected to the 2020 T-nut frame. If you want to you can glue the springs to the bottom and the lower parts spring connectors with some hot glue.
If you like and enjoy it please post a make!
I needed to replace the extruder spring of my Ender 3 due to under extrusion. I only could order 10 spare pieces per package for a couple of Euros at a chinese reseller. With the residual spare springs I constructed these dampers for my Ender 3. All you need are two springs per damper.
Mounting:
The old rubber feed of your Ender 3 (dimensions of mine: 40 mm x 20 mm) can be attached to the bottom part of the spring damper. The top part can be connected to the 2020 T-nut frame. If you want to you can glue the springs to the bottom and the lower parts spring connectors with some hot glue.
If you like and enjoy it please post a make!
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
