Thingiverse
Spring clamp HT clip
door heathhey
3
Downloads
0
Likes
0
Makes
This is a remix of https://www.thingiverse.com/thing:3606564
This is designed to fit on 3/4" PVC pipe and provide a simple clip for an amateur radio HT. It could be used to clip about anything on a 3/4"PVC pipe. The STL is a tad loose, I would recommend making adjustments to the SCAD file to make the inside diameter a bit smaller if its too large. I just used a wrap of electrical tape at the spot I wanted to mount my HT on my tape measure yagi.
You will need to enable support everywhere. Print in PLA with the fan running full speed. Working the cam mechanism loose might take some gentle persuasion, depending on the tolerances of your printer.
This is designed to fit on 3/4" PVC pipe and provide a simple clip for an amateur radio HT. It could be used to clip about anything on a 3/4"PVC pipe. The STL is a tad loose, I would recommend making adjustments to the SCAD file to make the inside diameter a bit smaller if its too large. I just used a wrap of electrical tape at the spot I wanted to mount my HT on my tape measure yagi.
You will need to enable support everywhere. Print in PLA with the fan running full speed. Working the cam mechanism loose might take some gentle persuasion, depending on the tolerances of your printer.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!