Thingiverse
Sprinkler for Plants
por Ritika-Das
58
Descargas
39
Likes
0
Makes
This is a 3D Sprinkler designed to water your potted plants. Just place the sprinkler around it without having to uproot your plant, as it is cut at an angle of 30 degrees.
Video link: https://youtu.be/y1kl_0LNISU
Walls of sprinkler are 2 mm thick, and it has 13 holes of 0.8 mm diameter for the spray pattern.
The inbuilt nozzle is for taking water in through a pipe that fits on top of it. It has a hole from where it is connected to the sprinkler body. It is designed to provide a more tighter fit to the water pipe which tends to slip away.
Both hose and sprinkler tube can be printed and used separately. Hole in sprinkler body is 4.5 mm in diameter.
Bigger outer diameter: 7.1 mm
Smaller outer diameter: 5.9 mm
Inner diameter (hole): 3.9 mm
Height of overall hose: 15 mm
The inner diameter and outer diameter of the sprinkler are 185 mm and 202.6 mm respectively.
Video link: https://youtu.be/y1kl_0LNISU
Walls of sprinkler are 2 mm thick, and it has 13 holes of 0.8 mm diameter for the spray pattern.
The inbuilt nozzle is for taking water in through a pipe that fits on top of it. It has a hole from where it is connected to the sprinkler body. It is designed to provide a more tighter fit to the water pipe which tends to slip away.
Both hose and sprinkler tube can be printed and used separately. Hole in sprinkler body is 4.5 mm in diameter.
Bigger outer diameter: 7.1 mm
Smaller outer diameter: 5.9 mm
Inner diameter (hole): 3.9 mm
Height of overall hose: 15 mm
The inner diameter and outer diameter of the sprinkler are 185 mm and 202.6 mm respectively.
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
