Sprinkler Spike

Nothing is more annoying than setting up your sprinkler and as you walk to turn on the water, the flex in the hose flops it over upside-down. Or else once you turn on the water and the water pressure tips the sprinkler to the side. This simple spike solves this problem for most any type of lawn sprinkler. Screw your hose onto one side, your sprinkler onto the other and then shove the spike into the ground. There is a locking knob on top that you can loosen to adjust the angle of the sprinkler and then tighten once in place. To assemble, first thread the male-female hose connector through the spike. Next, drop the little round spacer into the hole in the top of the spike and then screw in the knob to hold it in place. The spacer is to keep the tip of the knob screw from grinding against the thread on the hose connector.