Spuds Arcade Joystick

Arcade Joystick Build
Disclaimer
This is something I made for fun and shared in case others find it useful. It isn't a perfect design, and there are probably areas that could be improved. The dimensions and methods described below are simply what worked for me.
Parts List
Screws
• 8 × M3 × 20 mm
• 4 × M2 × 8 mm
Coach Bolts
• 8 × M5 × 30 mm coach bolts
• 8 × M5 nuts
Buttons
• 5 × DaierTek 12 mm momentary push-button switches
• 6 × Happ-style 28 mm concave push buttons
Joystick
• 1 × Arcade joystick
Perspex / Polycarbonate
• 1 × Perspex sheet, 150 × 200 × 3 mm
• 1 × Polycarbonate sheet, approximately 145 × 190 × 5 mm
USB Controller
• 1 × Arcade USB encoder board
Artwork
• A4 printout on standard 80 gsm paper, trimmed to size
Glue
• Glue for controller board shelf
Feet
• Self-adhesive rubber feet (or similar)
Tools Required
• Printer (for artwork)
• 3D printer with a build volume larger than 210 × 160 mm
• 28 mm hole cutter (for the Perspex)
• Drill
• Small file set
• Jigsaw
Dimensions
Th