Slicer Discord
Spyda 500 Quad Remix – 3D-printbaar model van Thingiverse Thingiverse
Spyda 500 Quad Remix – Bild 1 Spyda 500 Quad Remix – Bild 2 Spyda 500 Quad Remix – Bild 3 Spyda 500 Quad Remix – Bild 4 Spyda 500 Quad Remix – Bild 5 Spyda 500 Quad Remix – Bild 6
Hobby

Spyda 500 Quad Remix

door andycap · Hobby
353 Downloads
229 Likes
5 Makes
Model downloaden
I have made a few parts for the Spyda 500. Body shell, Top plate with mounting points for the MultiWii/Cirrus controller board case that I have also included. The controller case mounts to the top plate with orange ear plugs to give vibration isolation.

I have also added a stronger DJI arm after finding that the included DJI one flexes quite a bit.

Added a mount that can be used for APM 2.5 with my top plate. Called generic mount.

Added a wall bracket to store your Spyda 500.

Added a gimbal mount that fits on the front and will bolt to top and bottom plate with 4 m3 socket head cap screws. The mounting holes are 2.5mm I tap them out to m3. you will need to make two holes in top and bottom plate 34mm apart at centres. If you use my top plate the holes are already there but the bottom plate will need them.
Categorie
Hobby
Bron
Thingiverse
Gepubliceerd
Wat je nodig hebt om te printen: Gemiddeld Lage betrouwbaarheid
Eendelig Hardware nodig
Supports 1/3
Montage 0/3
Instellingen 1/3
Bedgrootte 0/3
Nabewerking 1/3
Printer
FDM / FFF
Bestandsformaat
STL
Materiaal
PLA
Nabewerking
Hardware
Software
Cura, PrusaSlicer of vergelijkbaar
Nog geen beoordelingen
Nog geen reacties – wees de eerste!

Vergelijkbare modellen

6 Suggesties
Feed Blog Slicer Kostenrekenmachine Zoeken op afbeelding Indienen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Toevoegen aan collectie