Thingiverse
SQ12 mount for X2 ELF
di 586837r
3
Download
1
Likes
0
Makes
This is a mount for the [Quelima SQ12 Mini](https://www.banggood.com/Quelima-SQ12-Mini-1080P-FHD-DVR-Camera-155-Degree-FOV-Loop-cycle-Recording-Night-Vision-p-1226905.html) camera on the [X2 ELF 88mm FPV Racing Frame](https://www.banggood.com/X2-ELF-88mm-Micro-Brushless-FPV-Racing-Frame-Kit-3K-Carbon-Fiber-p-1146235.html).
The camera is at a **30° angle**.
To fit the camera in you need to lift the front part where the lens hole is up. This will bend the case so that the camera can fit in (see images). Once the camera is in, there is about 1mm play for the depth of the case. You can squeeze in some object behind the camera to make it fit more tightly (see images).
For even more safety you can tie a zip tie from the bottom to the top of the case above the cameras buttons. Though this is probably overkill.
The camera is at a **30° angle**.
To fit the camera in you need to lift the front part where the lens hole is up. This will bend the case so that the camera can fit in (see images). Once the camera is in, there is about 1mm play for the depth of the case. You can squeeze in some object behind the camera to make it fit more tightly (see images).
For even more safety you can tie a zip tie from the bottom to the top of the case above the cameras buttons. Though this is probably overkill.
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
