Thingiverse

SquadV2 Pigtail mount

by theswedishbear

1 Downloads

0 Likes

0 Makes

A top-mounted, pigtail mount for the SquadV2.

**Hardware:**
2x M3 nuts
4x M3 screws
1x Pigtail with screw mount

**Assembly:**
Insert the nuts into the 2 slots one from each side.
Insert the pigtail into the big slot. at the back.
Screw in the pigtail with 2 M3 screws.
Lastly, screw it into the top plate with the last 2 screws.

**Notes:**
The screwsI used was 4 screws I had leftover from the frame build.

When printing use at least 3 layers and no less than 5% infill.

antenna Antenna holder antenna mount fpv FPV Antenna fpv racer fpv racing pigtail mount tbs pigtail TBS Unify TBS unify mount TBS Unify Pro vtx VTX-Mount vtx antenna holder vtx holder vtx mount vtx pigtail antenna Antenna holder antenna mount fpv FPV Antenna fpv racer fpv racing pigtail mount tbs pigtail TBS Unify TBS unify mount TBS Unify Pro vtx VTX-Mount vtx antenna holder vtx holder vtx mount vtx pigtail

Source

Thingiverse

What you need to print this: Intermediate Low confidence

Single piece Hardware needed

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 1/3

Printer

FDM / FFF

File format