Square Cupboard Door Handle [Parametric]

A completely customisable handle for your cupboard doors. Customise the size with the following:Width - Changes the width of the model, this is also the diameter of the circular pegsHoleSpacing - centre to centre spacing of the fixing holes. *Screw - diameter of the mounting screw.**Thickness - Small edge thickness (before the surface curves) Projection - Distance from the mounting surface to the face of the handle. Note the calculation is (Width/2) + x to ensure there is enough room for the screw. *To get the length of the model add the 2x Width and HoleSpacing **I would recommend to under size the hole by .2-.5mm to get a nice fit. For printable file I undersized the M4 screw by .3mm for a tight fit that self taps. *** The screw depth is automatically set to (projection - thickness) The attached printable files are 80, 110, 150mm hole spacing, 15mm width and 20mm projection. There is also a parametric drill guide at the following link - https://makerworld.com/en/models/1883344-parame