Square lantern Part 1 ( Panels and Top)

IMPORTANT!!! The project it's easy but it's divided into two main steps: Laser Cutting & Print 3d , and it's built in print! no glue needed or post assembly This is the First Step Laser cutting: the decorative side panels and the square top cover must be cut using a laser, Recommended material is plywood with a thickness between 2.5 mm and 3 mm. There are 2 files Panels and Top, the Panels file needs to be cut to get the side panels, the top file also needs to be cut, is required to close the top of the lantern, and there is optional engraving of small stars, they can also be cut!, whether or not this part is made on the top file will not affect the result 📏 It 's essential to check the panel thickness with a caliper before starting to ensure a proper fit in the 3D printed frame. Panels mesure 69.6mm x 78mm do not change this size !! ⚠️ Also, the wood used must be perfectly flat—even slight warping can interfere with the fit or cause print fail or damage! when it resumes in 3d print i