Squishy Wall Bumper Kid and Edge Protector

Prevent trips to the hospital with this handy bumper.10% gyroid infill using 95A TPU (default in the print profile) gave a firm but squishy feel suitable for softening cranial impactsPrint profile has a height of 240mm. Pattern repeats exactly every 30mm so you can cut into any multiple of 30mm to get the height you need and a seamless transition. Option without the leaf pattern included in the profile.100-250g of material to protect an edge depending on how tall your kids arePrint profile includes versions for mounting with:Thin Tape such as Scotch Double Sided Tape (recommended)Thick Tape (0.7-1mm thick) such as Makers Supply double sided tape or Scotch Indoor Heavy Duty using the print profile with grooves that the thicker tape fits into.The tapes I used are the links above and both worked well for me. On my X1C I printed batches of 5x240mm sections to protect edges using a 0.4mm nozzle and 0.2mm layer height. While I used 95A TPU, other soft filaments or event PETG could be used wi