SR-71 Blackbird display stand

This is a display stand for the SR-71 blackbird thing:
http://www.thingiverse.com/thing:35383

I used the above model to shape the part that contacts the fuselage. It fits reasonably well, but a tiny bit of double sided tape may be required to help it hold.

The base doesn't need any support, the lettering comes out pretty well. The top part of the stand needs a little support behind the main column.

Originally I hoped the top and the base could be held together by the little plug, but on my printer, the 2.5mm plug doesn't print too cleanly, so I ended up using some glue to set the two pieces together.