SSD1306 0.96" OLED Display Mount

SSD1306 0.96" OLED Display MountMount for the common SSD1306 0.96" OLED display. Designed for arcade sticks. Angles the display towards the player. Mounting material compatibilityThe mount was designed for 10 mm thick (0.3937 inch) or shallower material. If mounted in deeper material the angled dupont connectors might get in the way. You could change the connector to JST or solder directly to the PCB to get around this. Or use the source file and re-align the mount opening to a less steep angle. VersionsAlternative 1Original design. A smaller opening which shields the display from light glare and prevents light escaping. Prints with the top surface facing down. Alternative 2AAlt 2A/B opens the full surface area up for the display.2A is a single solid body but should be printed in a different orientation than Alt 1 and needs supports.Alt 2A uses a different cable lock than Alt 1/2B.Alternative 2BThis version doesn't need supports and thus has a cleaner surface on the reverse