Thingiverse
SSQ22 mag speedloader
door Tiskar
0
Downloads
1
Likes
0
Makes
Speedloader adapter for SSQ22 magazine.
The pin should be printed with 99% infill. It is necessary to remove "elefant legs" from printed parts.
If necessary it is possible to use metal wire to hold parts together. IMHO you will not need it...
Printed on Prusa MK3 printer.
For PLA print these parameters were used: layer 0.15 mm, speed 80 mm/s, infill 35%, temperature 218 Celsius, cooling 20%. Print body upside down, support is necessary.
The pin should be printed with 99% infill. It is necessary to remove "elefant legs" from printed parts.
If necessary it is possible to use metal wire to hold parts together. IMHO you will not need it...
Printed on Prusa MK3 printer.
For PLA print these parameters were used: layer 0.15 mm, speed 80 mm/s, infill 35%, temperature 218 Celsius, cooling 20%. Print body upside down, support is necessary.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!