SSUPD Meshlicious DDC Pump Bracket

This is a DDC pump bracket to fix a ddc pump on the bottom of the SSUPD Meshlicious if the screw holes of the pump mounting don't line up with the case holes. You can fix M3 screws on the bracket first by putting nuts in the wider holes and then screwing it to the pump. Then you can place the pump and fix it underneath the case with nuts.

I made it with PETG, PLA should work easily as well tho. Just make sure you have enough walls, otherwise PLA can crack more easily when screwing down.

I have the EK DDC PWM pump with the silencer metal bottom.
It should fit any DDC pump with screw holes 5cm apart from each other.
The whole piece is 60x60x3 mm.

I'd advise to use at least 4x M3 screws (10mm) and 8 M3 nuts.