SSUPD Meshlicious Panel Mount Display Connector Bracket

I love the SSUPD Meshlicious PC case, but I wanted regular back panel display connectors instead of trying to plug in angled connectors through the bottom. This bracket clamps around the rear display cable hole and provides a surface for panel-mount connectors (DP, HDMI, etc). There is a little bit of flex when plugging/unplugging cables, but the panel stays firmly in place.

Included STLs support the following panel-mount connectors and require the highest GPU position for clearance. These were chosen to provide just enough slack to snake around and back into an MSI 3080 Ventus while not interfering with each other.
[HDMI](https://www.amazon.com/gp/product/B08BJK7Q8W/)
[DP](https://www.amazon.com/gp/product/B07FFQGSNF/) (Left angle variant) - Requires 5-8mm M3 screws, not included. Tested 1440p@144Hz with G-SYNC.

Included STEP file has blanks for cutting your own mounting holes for other connectors. The two halves rely on the panel mount screws to clamp on the case.