Thingiverse

Stackable Dispenser

by FixedByCommGuy

60 Downloads

42 Likes

0 Makes

This is a stackable Hopper style parts dispenser. The lid covers the top or you can stack vertically.

Both print fine on my Prusa with no supports.

With basic Prusa Preset for .20 mm layer height it takes about 16 hours to print and 222g of filament.

bougies container dispenser Hopper kitchen stackable Stackable container things to make tools bougies container dispenser Hopper kitchen stackable Stackable container things to make tools

Source

Thingiverse

What you need to print this: Beginner Medium confidence

Why?

no supports · 0.20mm layers

Support-free Single piece

Supports 0/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Layer height

0.2 mm

Est. print time

16 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Does Stackable Dispenser need supports when printing?

No supports needed for Stackable Dispenser — it's designed to print clean off the bed.

How long does it take to print Stackable Dispenser?

According to the design notes, Stackable Dispenser takes approximately 16 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is Stackable Dispenser available in?

Stackable Dispenser is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is Stackable Dispenser free to download?

Yes, Stackable Dispenser is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Stackable Dispenser

Add to Collection