Stackable Expandable Rotating Moveable Storage Arm

This storage system adds more storage for the smaller things you are working with without taking up too much space. You can pull it towards you when you need it, and when you're done with it you can swing it out of the way. You can add as many layers of storage as you like with the modular design! The three different-sized trays allow you to decide how you want to divide the available space and allow for easy removal for reorganizing. They can also be easily labeled with some tape and pen. Everything was printed in PLA and worked fine, but stronger/stiffer materials like PETG and ABS will work even better without needing to increase walls and infills too much.PRINT TIP:- Depending on what you will store, print the arms and clamp stronger than usual to minimize sag and breakage ( I used 0,2mm layer height, 4 walls, and 30% infill)- The rotatable arms are the same design so you could add more of them to give the storage a further reach (make sure to print them stronger the longer you