Cults3D
€ Paid
Gadget
Model downloaden
Stackable HDD & SSD Storage Boxes
0
Downloads
0
Likes
0
Makes
Stackable storage boxes for 2,5inch and 3,5inch harddrives and SSD's.
These boxes have a groove on the bottom that locks into the top of another of these boxes.
Drives go in sideways to increase the bottom surface area so they are more stable and can stack higher.
The tops of the drive slots have finger cutouts to more easily take drives from the box.
The 2.5inch drive version takes 26 drives up to 9.5mm thick, which is the most common maximum thickness for these drives. SSD's are usually only 7mm thick and thus will also fit.
The 3.5inch drive version takes 10 drives up to 26.11mm thick, which is again the most common maximum thickness for this type of drive. This should fit thick bois like the Exos X16 (this one's for you, Datahoarder crowd!)
These boxes have a groove on the bottom that locks into the top of another of these boxes.
Drives go in sideways to increase the bottom surface area so they are more stable and can stack higher.
The tops of the drive slots have finger cutouts to more easily take drives from the box.
The 2.5inch drive version takes 26 drives up to 9.5mm thick, which is the most common maximum thickness for these drives. SSD's are usually only 7mm thick and thus will also fit.
The 3.5inch drive version takes 10 drives up to 26.11mm thick, which is again the most common maximum thickness for this type of drive. This should fit thick bois like the Exos X16 (this one's for you, Datahoarder crowd!)
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
