Thingiverse
Stackable Shoe Rack 18 x 200 mm
par berkk
40
Téléchargements
43
Likes
0
Makes
Models:
- Original fitted for 18 x 200 mm planks
- Extended height for 18 x 200 mm planks
Details:
Tweaked the original for a perfect, thight fit of a 18 x 200 mm plank.
Also I added a version with extended height (219mm instead of 193 mm) for storing bigger shoes and better reachability.
Should fit perfectly on the print bed of an Ender 3 Pro, although I used the Lotmaxx SC-10 Shark with a slightly bigger build plate.
The plank fits right in and stays stuck inside.
Settings:
- 9 Perimeters
- 0 Top/Bottom Solid Layers
- 5% Honeycomb Infill (PrusaSlicer)
For the extrudr BioFusion quicksilver PLA I also had to reduce speed to 30 mm/s (50% of that for small/external perimeters), first layer 20 mm/s. Temperature for BioFusion 210/205° and 60° bed.
Tipp: Watch the first layer closely and adjust bed level slightly, because warping can happen easily on such a big print.
- Original fitted for 18 x 200 mm planks
- Extended height for 18 x 200 mm planks
Details:
Tweaked the original for a perfect, thight fit of a 18 x 200 mm plank.
Also I added a version with extended height (219mm instead of 193 mm) for storing bigger shoes and better reachability.
Should fit perfectly on the print bed of an Ender 3 Pro, although I used the Lotmaxx SC-10 Shark with a slightly bigger build plate.
The plank fits right in and stays stuck inside.
Settings:
- 9 Perimeters
- 0 Top/Bottom Solid Layers
- 5% Honeycomb Infill (PrusaSlicer)
For the extrudr BioFusion quicksilver PLA I also had to reduce speed to 30 mm/s (50% of that for small/external perimeters), first layer 20 mm/s. Temperature for BioFusion 210/205° and 60° bed.
Tipp: Watch the first layer closely and adjust bed level slightly, because warping can happen easily on such a big print.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !