Thingiverse

Stacking box

by CreativeTools

5.8k Downloads

4.5k Likes

30 Makes

Go to Model

Stacking box

Think inside the box, you can never have to many boxes.

Print a few of your own stacking boxes to keep your things in order may they be screws, nuts, bolts, toys or other miscellaneous things.

Just like our Candy Bowl we designed this box specifically for testing 3D-prints with large-bore nozzles. The result is a semi-transparent box 3D-printed at 0.8mm layerheight with a 1.0 mm nozzle.

Even though it is possible to print this box at higher speeds, we kept it down to achieve a high-gloss shiny surface toghether with a all together higher quality print. This shows very well in the two attached pictures with the lower part being printed at a higher speed than the top part. Not only will the result have a higher degree of transparency but the print quality will also be alot better since the plastic can be extruded and cooled down at a lower rate which is needed when extruded with a larger size nozzle.

The outer dimensions of the box is 120x120x80mm. At around

3D-print 3d-printer 3d-printing 3D-skrivare 3DP 3dprinting 3Dskrivare 3d print 3d printer 3D printing Additive manufacturing box boxes container layer Nozze office pet PETT rapid prototyping stackable storage supply t-glase taulman taulman 3D thick Thick-Layered transparent 3D-print 3d-printer 3d-printing 3D-skrivare 3DP 3dprinting 3Dskrivare 3d print 3d printer 3D printing Additive manufacturing box boxes container layer Nozze office pet PETT rapid prototyping stackable storage supply t-glase taulman taulman 3D thick Thick-Layered transparent 3D-print 3d-printer 3d-printing 3D-skrivare 3DP 3dprinting 3Dskrivare 3d print 3d printer 3D printing Additive manufacturing box boxes container layer Nozze office pet PETT rapid prototyping

Source

Thingiverse

What you need to print this: Intermediate Low confidence

Single piece Hardware needed

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 1/3

Printer

FDM / FFF

File format