Slicer Discord
Stadia controller dual charging dock – 3D-Druckmodell von Thingiverse Thingiverse

Stadia controller dual charging dock

15 Downloads
11 Likes
1 Makes
Zum Modell
I couldn't find a dual controller docking station for my two Google Stadia controllers, so I designed my own.

I was inspired by the [Wall mount] [wallmount] created by KaeptnKorn, which features a perfect curve to support an official stadia controller and used this in my model.

[wallmount]: https://www.thingiverse.com/thing:4282495

I printed the "top" part back-side-down with tree-support touching buildplate in Cura.
The other parts do not need support.
I used 4 M3x6x5 brass threaded inserts that I melted into the holes in the top-part
4 M3x12 screws are needed to mount the bottom to the top part.

With my printer-tolerances I was able to snug-fit the original charging cables in the respective holes. You can print 4 (2 for each charger) inserts to put behind the USB-C connector if needed to keep everything in place.

The Stadia Logo is glued in place.
Quelle
Thingiverse
Was du zum Drucken brauchst: Mittel Niedrige Konfidenz
Einteilig Hardware nötig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 1/3
Drucker
FDM / FFF
Dateiformat
STL
Material
PLA
Nachbearbeitung
Hardware
Software
Cura, PrusaSlicer o. Ä.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen