Stained Glass Bee

Stained Glass Bee The base image used to make this was made using AI image generation.I used the Lithophane setting in Hueforge to make these.This is printed in two parts. The two parts are glued back to back to make the final product. Here are the specific colors with transmission distances that I used.Please note that for some of the transmission distances I had to print test samples and got them visually as close as I could. They may not be 100% exact.BambuLabs Basic Jade White - TD 5.0BambuLabs Yellow - TD 6.0Hatchbox True Orange - TD 5.0Hatchbox Light Blue - TD 3.2Hatchbox Black - TD 0.2 The .3mf file is already set up with the correct color swaps, but I will put the color swaps below if you decide to use the raw .stl files. Settings in Bambu StudioAll settings are default except the ones specified below. 0.08mm Extra Fine Quality:Layer height - 0.04Initial layer height - 0.16Slice gap closing radius - 0 Strength:Top shell layers - 0Top shell thickness - 0Bottom shell layers - 999