Stained Glass Ghosts

The base image used to make this was made using AI image generation.I used the Lithophane setting in Hueforge to make these.This is printed in two parts. The two parts are glued back to back to make the final product. Here are the specific colors with transmission distances that I used.Please note that for some of the transmission distances I had to print test samples and got them visually as close as I could. They may not be 100% exact. Please also note that Bambu Studio may tell you that there are floating regions in this model. I was able to print it with no issues with no supports.Part 1 (Orange Plate):Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mmFilaments Used: PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic Red Transmission Distance: 4 PLA Hatchbox Black Transmission Distance: 0.2Swap Instructions: Start with Jade White At layer #4 (0.28mm) swap to Yellow At layer #13 (0.