Stand for SpotMicroESP32

Stand for SpotMicroESP32.



Required Printed Parts:
- Stand.stl (2x)
- StandConnector.stl (2x)
- StandFoot.stl (4x)


Required OtherParts:
- M3 nuts (8x)
- M3 screw length 12 mm (8x)


Recommended Materials:
- PLA (30%): Stand.stl, StandConnector.stl
- Ninjaflex (10%): StandFoot.stl
- Ninjaflex (10%): StandAntiSlip.stl



Changes 5 Jan 2021:
- added optional StandAntiSlip.stl to avoid that robot slides in stand while testing
- added optional Stand_TopHalf.stl and Stand_BottomHalf.stl which should be glued together. These parts can be used if the stand.stl does not fit the printbed