Thingiverse
stand&sit
by ycharka
4
Downloads
5
Likes
0
Makes
Stabilization Add-ons for crutches - "stand & sit"
This project was done through a "fixperts" course in our Industrial Design studies, in which we came together in order to solve the problem of fallen crutches while leaning them against surfaces such as walls and table-tops.
You can watch the YouTube video telling the story and explaining the project:
These are two objects, which are ready for printing, but you'll need to acquire two additional materials for them to work:
1. For attaching "stand" to the crutch's cuff - Strong double-sided adhesive tape (1/2" or 12mm wide) - https://www.amazon.com/3M-VHB-5952-Automotive-Industrial/dp/B00MAQBPEM/ref=sr_1_4?dchild=1&keywords=3m+double+sided+tape+0.5+in&qid=1610727539&sr=8-4)
2. For enhanced friction - Half-dome shaped, adhesive silicone rubber bumpers(10mm) -https://www.amazon.com/100Pack-Cabinet-Bumpers-Diameter-9-5mmX3-8mm/dp/B078ZCQFLF/ref=sr_1_12?dchild=1&keywords=scotch+bumpers+10mm&qid=1614092643&sr=8-12)
"stand" assi
This project was done through a "fixperts" course in our Industrial Design studies, in which we came together in order to solve the problem of fallen crutches while leaning them against surfaces such as walls and table-tops.
You can watch the YouTube video telling the story and explaining the project:
These are two objects, which are ready for printing, but you'll need to acquire two additional materials for them to work:
1. For attaching "stand" to the crutch's cuff - Strong double-sided adhesive tape (1/2" or 12mm wide) - https://www.amazon.com/3M-VHB-5952-Automotive-Industrial/dp/B00MAQBPEM/ref=sr_1_4?dchild=1&keywords=3m+double+sided+tape+0.5+in&qid=1610727539&sr=8-4)
2. For enhanced friction - Half-dome shaped, adhesive silicone rubber bumpers(10mm) -https://www.amazon.com/100Pack-Cabinet-Bumpers-Diameter-9-5mmX3-8mm/dp/B078ZCQFLF/ref=sr_1_12?dchild=1&keywords=scotch+bumpers+10mm&qid=1614092643&sr=8-12)
"stand" assi
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
