Thingiverse
Standard Servo Mount (Flat)
von Wayne91
366
Downloads
329
Likes
2
Makes
Servo mount designed for my R/C boat, flat as possible, small as possible and stable as possible.
Servo mount is designed to glue it into the boat but can also be screwed, bottom hole diameter is 3mm.
Fits with standard 40x20mm servos.
Dimensions of the base plate: 40x60mm
Height total: 23mm
Drill diameter is 48x10mm, can also be used for 49x10mm.
Designed to mount servo with M3 screws, hexagon headnuts fits inside the model.
Designed to print with FDM and DLP printers.
Servo mount is designed to glue it into the boat but can also be screwed, bottom hole diameter is 3mm.
Fits with standard 40x20mm servos.
Dimensions of the base plate: 40x60mm
Height total: 23mm
Drill diameter is 48x10mm, can also be used for 49x10mm.
Designed to mount servo with M3 screws, hexagon headnuts fits inside the model.
Designed to print with FDM and DLP printers.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
