Standing shelf

Used Shopbot PRSalpha for CNC cut
If someone has access to makerspace or fablab it would be perfect.

Ready to be cut with material of 18mm thickness. I used leftover plywood for recycling.

Strongly recommend tolerance test before making full cut, since my CNC was not in its perfect state and plywood was very weak.

Ver2. 29/11/18

Added fixture to hold both ends from wiggling.
It is not necessary but, if you are not using solidwood i suggest you cut out 'fixture' so
it can be steady.

For personal use you can add fillet with hand trimmer. which works nice when you are using it indoor with childeren.