Thingiverse
Star Wars Armada Compatible Tiny Ship Stand
16
Descargas
10
Likes
0
Makes
Tiny Ship Stand for the Star Wars Armada
table top game. For those folks looking for a smaller stand than the standard FFG small stand but still has 4 shield dials.
Instructions are here: https://www.facebook.com/Utar-Games-and-Designs-109253333972969
These parts were designed and tested for FDM printing with 0.2mm layer height. No supports should be needed. The parts come oriented to lay flat and are oriented in a way to ensure good part strength. There might be some part size variations depending on your print settings. This normally does not cause major problems (you may just need to sand or use a razor knife to get parts to fit together). These files have not been tested with resin printers.
table top game. For those folks looking for a smaller stand than the standard FFG small stand but still has 4 shield dials.
Instructions are here: https://www.facebook.com/Utar-Games-and-Designs-109253333972969
These parts were designed and tested for FDM printing with 0.2mm layer height. No supports should be needed. The parts come oriented to lay flat and are oriented in a way to ensure good part strength. There might be some part size variations depending on your print settings. This normally does not cause major problems (you may just need to sand or use a razor knife to get parts to fit together). These files have not been tested with resin printers.
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
