MakerWorld
Hueforge & Lithophane
Model downloaden
Star Wars bookmark 2
39
Downloads
38
Likes
30
Makes
BOOKMARKSET Star Wars 2 of 2 Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 38.39x160.01mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Basic Cyan Transmission Distance: 3.5 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Blue At layer #13 (1.12mm) swap to Cyan At layer #20 (1.68mm) swap to Jade White for the rest.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
